Our service

Centre Testing International Co., Ltd. (CTI) is the pioneer and leader in the TIC Industry which provides one-stop solutions on testing, inspection, certification, calibration, audit, training & technical services.

 

By Industry

Our service capabilties cover the upstream and downstream of the supply chain including textile and apparel,toys,electronic appliances,medical health,food...andother industries.

Specialty

Comprehensively guarantee quality and safety, promote compliance and innovation, demonstrate brand competitiveness, and achieve higher quality, healthier, safer, and greener sustainable development.

AUTHORITY & TRUST
QUALITY & VALUE
Corrosion Testing

Corrosion test is an inspection test to manage production process and control product quality. It is also a common method to study corrosion mechanism, select effective anti-corrosion measures and develop new corrosion resistant materials. CTI has been deeply engaged in the field of material analysis for ten years. With solid professional knowledge, we can provide customers with comprehensive and rapid corrosion test scheme, which is helpful to solve various corrosion related problems.

Corrosion Testing

◉    Service Background

  1. In a given environment, determining the adaptability of various corrosion prevention measures, the best choice, quality control approach and expecting after take these measures the component’s service life;
  2. Evaluation of corrosion resistance of materials;
  3. Determining the erosivity of the environment, and reseaching the effects of impurities and additives on corrosion rate and corrosion morphology;
  4. Reseaching the environmental pollution of corrosion products;
  5. It is used as reproducibility test when analyzing the failure reason of components;
  6. Studying the corrosion mechanism.

◉    Service Content

1.   Routine test items

Salt spray test

Neutral salt spray test (NSS), acetic acid-salt spray test (AASS), copper accelerated acetic acid-salt spray test (CASS), cyclic salt spray test, filiform corrosion, heat-resistant brine

stainless steel Intergranular corrosion

10% oxalic acid etch test for stainless steel, Sulfuric acid / ferric sulfate test for stainless steel, Sulfuric acid / ferric sulfate test for stainless steel, 65% nitric acid test for stainless steel, Nitric acid/ hydrofluoric acid test for stainless steels, 16% sulfuric acid/ copper sulfate test for stainless steel, 35% sulfuric acid/ copper sulfate test for stainless steel, 5% sulfuric acid test for stainless steel

Dezincification resistance of copper alloys

Dezincification of brass is a typical selective corrosion, that is, the active components in the alloy are selectively dissolved. Because different brass materials have different dezincification corrosion rates, the use of copper chloride can accelerate the dezincification corrosion of brass, thus producing different degrees of dezincification layer. The depth of the dezincification layer is measured by metallographic microscope.

2.   Adaptive range of product

      It is suitable for metal materials and its products, automobile parts, aerospace parts, building steel structure, petrochemical industry, marine engineering, bridge grid, hardware profiles, etc.

3.   Sample requirements

Salt spray test

Whole piece test

10% oxalic acid etch test for stainless steel

Sample size≥30mm*30mm*3mm

Sulfuric acid / ferric sulfate test for stainless steel, Sulfuric acid / ferric sulfate test for stainless steel, 65% nitric acid test for stainless steel, Nitric acid/ hydrofluoric acid test for stainless steels, 16% sulfuric acid/ copper sulfate test for stainless steel

1. Plate / strip (section steel)

Thickness T < 4mm, 80mm * 20mm * t

Thickness 4mm < T, 80mm * 20mm * (3 ~ 4mm)

2. rods / wire / tube / welded pipe: L=80mm. T = t or T = 3 ~ 5mm

3. Tube 15mm < OD, 4mm ≤ t

35% sulfuric acid/ copper sulfate test for stainless steel

1. Raw material sample: ≥ 80 * 10 * (2 ~ 6) mm

2. Welding sample: ≥ 100 * (20 + 20) * (2 ~ 6) mm

5% sulfuric acid test for stainless steel

Sample surface area ≥ (10 ~ 30) cm2

Dezincification resistance of copper alloys

Sample size ≥ 10 mm * 10 mm * 10 mm, area ≥ 100 mm2

4.   Our Advantages

1) We have experienced technicians to provide detailed technical consultation and result analysis;

2) We have advanced high-end and automation integrated detection equipment to provide a variety of detection programs;

3) We have Complete testing and results reporting process to ensure accurate and reliable test results.

Related recommendations