Test of Cable-CTI

AUTHORITY & TRUST
QUALITY & VALUE

Home > Our Services > Electronic & Electrical Appliances > Testing > Reliability > Service Details

Test of Cable

The rapid development of domestic economy is inseparable from the security guarantee of the power system. In the power system the demand for wires and cables is also increasing. All kinds of inferior wire and cable products flooded the whole market and seriously affected our engineering and personal safety. CTI can test the raw materials, finished products and accessories of wires and cables. This test can ensure the safety of products and provide support for product improvement and quality improvement.

◉ Business Challenges

How is the quality safety of wires and cables tested？

How is the quality of wires and cables verified？

◉ Service content

Ⅰ. Applicable Test Standards

GB/T 2099 Plugs and socket-outlets for household and similar purposes

GB/T 2951 Common test methods for insulating and sheathing materials of electric and optical cables

GB/T 3956 Conductors of insulated cables

GB/T 5013 Rubber insulated cables of rated voltages up to and including 450/750 V

GB/T 5023 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V

GB/T 9330.1 Plastic insulated control cables. Part 1: General requirements

GB/T 12706.1 Power cables with extruded insulation and their accessories for rated voltages from 1 kV(Um=1.2 kV) up to 35 kV (Um=40.5 kV) ). Part 1: Cables for rated voltage of 1 kV(Um=1.2 kV)and 3 kV(Um=3.6 kV)

GB/T 16915.1 Switches for household and similar fixed-electrical installations. Part 1: General requirements

GB/T 19666 General rules for flame retardant and fire resistant electric wires and cables or optical fiber cables

GB/T 25085/ISO 6722 Road vehicles. 60V and 600V single-core cables

JB/T 8139 Road vehicles-low voltage cables (wires)

JB/T 8734.1 Polyvinyl chloride insulated cables and wires and cords of rated voltages up to and including 450/750V. Part 1: General requirements

JB/T 8735.1 Rubber insulated cords and flexible cables of rated voltages up to and including 450/750 V. Part 1: General requirements

JB/T 10491.1 Cross-linked polyolefin insulated wires and cables with rated voltages up to and including 450/750V. Part 1:General requirements

QB/T 1453 Cable supports system

JB/T 10216 Cable support system for electric control distribution

T/CECS 31 Technical specification for steel cable supporting system engineering, etc.

Ⅱ. Product Range

Electrical engineering, Automobile, Rail transit, Electrical equipment, Communication, Construction, etc.

Ⅲ. Standard Sample Requirements

Please contact our business or customer service, based on specific standards.

Ⅳ. Test Item

Main test items
Low temperature winding	Impact at low temperature
Abrasion test	Test for vertical flame propagation for a single insulated wire or cable
Cold impact	Temperature Rise
Measurement of thickness and overall dimensions	Resistance to ageing, protection provided by enclosures of switches and resistance to moisture
Electrical resistance of conductors/voltage test carried out on completed cables	Creepage distances, clearances and distances through sealing compound
Insulation resistance and electric strength	Resistance of insulating material to abnormal heat, to fire and tracking
Pressure test at high temperature	Ozone aging
Test method for determining mechanical and physical properties of electric cables and wires	Degrees of protection(IP code)

◉ CTI Solution

CTI provides a comprehensive one-stop solution of reliability testing, including:

Environmental test

Reliability test

Reliability design

Reliability analysis

Product evaluation

Reliability training and consulting

◉ Our Strengths

CTI has many advanced equipments and has passed CMA/CNAS qualification accreditation, the test data is accurate and reliable, and the test report has international credibility.

The scientific laboratory information management system ensures the efficient operation of each service link.

The technical expert team has rich practical experience and can provide professional, rapid and comprehensive one-stop service.

The service network is all over the world, and many first-line brands designate cooperative laboratories.

◉ Service Process

Consult customer service → confirm the test plan → fill in the application form → send the sample → pay the test fee → test → send electronic report → express paper report

◉ Q&A

How long does the test period take？

The normal period is 5-7 working days (except the time when the sample is in the test chamber). If you need urgent help, please contact our sales or customer service.

What are the sample requirements for the low temperature winding test of the cable?

The diameter of the low temperature winding test cable shall not exceed 10 mm. Before testing it is needed to confirm the diameter of the sample to be tested and the required load.

What are the sample requirements for the cold impact test of the cable?

The diameter of cables for cold impact test shall be range 4mm to 75mm.

Before testing it is needed to confirm the diameter of the sample to be tested and the required weight of drop hammer.

How is the result of pressure test at high temperature for wires and cables evaluated?

The pressure, temperature and heating time on the blade should be confirmed before pressure test at high temperature for wires and cables. The evaluation is based on taking the maximum intermediate value for the indentation depth of the tested sample.

Related recommendations